|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Click to enlarge image(s)
|
The Phoenix is a product of the most advanced in surface polymer chemistry. It will remove all scratches/scuffs in the clear coats on most surfaces except latex coatings. The phoenix contains no solvents, water, alcohol or petroleum ingredients of any kind and is environmentally friendly. The Phoenix is a product that depends on ultraviolet light (UV) to cure for full strength. After one hour in full sunlight at 80 degrees or less, the product is hard and fully cured to ensure a beautiful finished coat. Temperatures of 55 and below may take longer. Peak hours of UV are between 11:00 to 2:30 pm.
Application: Use a cheap, disposable plain paper towel to apply polymer. (DO NOT APPLY The Phoenix directly on scratches) and then polish with a separate soft cloth towel to a high shine. (DO NOT POLISH WITH PAPER TOWEL CAN CAUSE ADDITIONAL SCRATCHES)
Caution: ...Never apply product directly on the area from the bottle. Apply light coats from your applicator (paper towel) and always out of direct sunlight. Simply cast a shadow over the area during application and then hand buffing it to a shine. The bigger application (1Square foot) will only take 12-15 seconds.
Keep sunlight away from bottle. For highly oxidized surfaces The Phoenix can be applied the same as above and in most cases will return it to it's original color. Repeated coats or buffing will eliminate the whiteness and in extreme cases may return. If so, surface must be compounded off by using a wax free product and the process repeated again with The Phoenix.
|
|
 |
|
 |
|
Specials
 AMIGO LEATHER PRIMERAmigo is Spanish for friend. This Amigo Leather Primer will be YOUR friend when applying dye to high wear leather areas. No kidding! It works so well you may want to take a siesta to celebrate!
|
 Finishing Touch, Velour Flocking ToolOur new velour flocking tool is definitely something you should take a look at! For those experienced technicians who are familar with the Electrostatic Guns, they are aware of the necessity of batteries, high costs, and challenge finding affordable equipment. We have revolutionized the stage of cloth repair with our new flocking tool called The Finishing Touch. It requires no batteries and it is very easy to use.
|
 FORGIVEN - CROSS LINKERDESCRIPTION: A tannery proven di-isocyanate type crosslinker. Last in mixture up to 4 days then dissipates. Do not discard color, may be reused and additional Forgiven may be added after 4 days.
FEATURES: A marked improvement in water, chemical, adhesion, abrasion and humidity resistance. Non carcinogen.
APPLICATION: Add 1% to 5% to water base dyes or velour spray adhesive - Dramatically improves adhesion to plastics.
|
 Leather Pride Clean and Condition KitLeather Pride Clean and Conditon Kit
|
 MINIATURE VELOUR KIT80 -COLORS 1 OZ BOTTLES OF VELOUR FIBER FLOCK, 1 OZ OF BULLSEYE AND HER MAJESTY SPREAD VELOUR ADHESIVES, PALETTE KNIFE, MOUTH ATOMIZER, KNOCK OUT SPRAY ADHESIVE 1 OZ
|
 SHIELDS UPShields Up is a great topcoat for your leather dye product. It protects your leather dye work from premature wear. It increases its durability and wearability. It is not aerosol. For those who do not have their own detail gun, you may opt to purchase a Preval Sprayer Unit.
|
|
|
 |
|
 |
|
|
|
|
|
|
|
