|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Click to enlarge image(s)
|
Fat color-cat is a cold, colored compound that has excellent filling capabilities. The product dries quick doesn't shrink or sink and is sandable. When applied directly to the repaired area the product dies with no gloss. Works especially well on leather furniture. Also good on rigid hard plastic. Fat Color Cat also has little to / no odor.
Clean the leather then apply desired color to damaged area with the palette knife using smooth finishing stroke.
To speed up curing time use a hair dryer or heat gun on a low setting.
If graining is preferred as opposed to sanding smooth. Apply grain after second coat press (pat) or gently hold in place while drying with hair dryer.
If sanding is desired use 220/320 sandpaper (Preferred).
In areas where the surface is sinking (like a wrinkle), one application may be all you need. Still caution should be exercised regarding application.
If needed, areas can be colored with normal water base or solvent color coat.
|
|
 |
|
 |
|
Specials
 AMIGO LEATHER PRIMERAmigo is Spanish for friend. This Amigo Leather Primer will be YOUR friend when applying dye to high wear leather areas. No kidding! It works so well you may want to take a siesta to celebrate!
|
 Finishing Touch, Velour Flocking ToolOur new velour flocking tool is definitely something you should take a look at! For those experienced technicians who are familar with the Electrostatic Guns, they are aware of the necessity of batteries, high costs, and challenge finding affordable equipment. We have revolutionized the stage of cloth repair with our new flocking tool called The Finishing Touch. It requires no batteries and it is very easy to use.
|
 FORGIVEN - CROSS LINKERDESCRIPTION: A tannery proven di-isocyanate type crosslinker. Last in mixture up to 4 days then dissipates. Do not discard color, may be reused and additional Forgiven may be added after 4 days.
FEATURES: A marked improvement in water, chemical, adhesion, abrasion and humidity resistance. Non carcinogen.
APPLICATION: Add 1% to 5% to water base dyes or velour spray adhesive - Dramatically improves adhesion to plastics.
|
 Leather Pride Clean and Condition KitLeather Pride Clean and Conditon Kit
|
 MINIATURE VELOUR KIT80 -COLORS 1 OZ BOTTLES OF VELOUR FIBER FLOCK, 1 OZ OF BULLSEYE AND HER MAJESTY SPREAD VELOUR ADHESIVES, PALETTE KNIFE, MOUTH ATOMIZER, KNOCK OUT SPRAY ADHESIVE 1 OZ
|
 SHIELDS UPShields Up is a great topcoat for your leather dye product. It protects your leather dye work from premature wear. It increases its durability and wearability. It is not aerosol. For those who do not have their own detail gun, you may opt to purchase a Preval Sprayer Unit.
|
|
|
 |
|
 |
|
|
|
|
|
|
|
