BIG MOUTH ULTRA TORCH WITH SMALL ATTACHMENT The small mouth ultra torch is also referred as to the Big Mouth . This is a wonderful tool that does not heat the material too fast. It is like the Ultra Torch.
|
|
|
BUTANE This butane refill tank size is economic and is used primarily for filling the butane heat tools. Keeping can upright and simply inserting stem into opening of tool, pressing and holding the unit; when it is full it will start to blow out.
|
|
|
CHILL BAR 1/2" x 6" The mini chill bar is an oblong F style bar made out of aluminum to help cool down and compress the repair cured compound for grain impression.
It is 1/2" x 6" flat on top and bottom.

|
|
|
CHILL BAR CONTOUR CONTOUR CHILL BAR
A rectangular chill bar made out of aluminum to help cool down repairs. It is 1”x 6" flat on bottom. It is contoured on top to help you round out your repairs.
|
|
|
CLEAR TEFLON MAT This product is a clear Teflon mat that allows heat transfer easily and allows the iron to slide easily over the repair area without sticking. can also be used with a heat gun and chill bar. 12" X 12"
|
|
|
HEAT REDUCER TIP 5 INCHES. This tool fits on the end of the Stienel, Rocky, and many other heat guns. The base is adjustable by squeezing the tip small and pushing it over the outside perimeter of the heat gun barrow. After repair always use caution. The heat reducer tip is still hot and can burn. Opening size is about the size of a small dime.
|
|
|
HEAT TOOL- BABY DRAGON The Baby Dragon tool is an amazing, yet inexpensive, tool that is excellent for the do it yourself kind of person and also can be used effectively for the professional tech as well. How so? The heat unit has a hollow shaft that allows heat to gather. The plastic tubing (as shown by the picture is inserted in the mouth and then one blows on it. The blower becomes the fan motor as hot air is then pushed and the gathered heat in the chamber then exits through the opening pointing to the uncured vinyl compound. The unit is electric.
|
|
|
HEEL PADS HEEL PADS MADE OF VINYL COMES IN 4 SIZES ---MINI. SMALL, MEDIUM, AND LARGE. ALSO COMES IN VARIETY OF COLORS.
|
|
|
MOUTH ATOMIZER this little mouth sprayer is truly amazing if you've never seen it in action. Simple put the long metal stem in your paint/dye arch it to a backwards L take a deep breath and B- L- O- !!!
|
|
|
MOUTH ATOMIZER CLEANERS These handy little wires with a type of cotton is inserted in to fluid chamber and pushed through. A must to have to keep your wind unobstructed and not having your eyeballs exploded unnecessarily.
|
|
|
PALETTE KNIFE 3" FLEXIBLE OFF SET BLADE This tool is made of stainless steel 3 1/2 inches long, flexible and ideal for spreading compounds for both hot and cold cures.
|
|
|
| QUIK DRAW GRAINING COMPOUND KITQuik Draw Graining Compound Kit has a gun with a dual cartridge. One cartridge is the graining compound and the other is the catalyst.
|
|
|
| Quik Draw Graining Compound Refill CartridgeQuik Draw Graining Compound Refill Cartridge is the refill for the Quik Draw Graining Compound Applicator.
Quik Draw Graining Compound Kit comes with the applicator and a cartridge. Once that cartridge is used up, you can choose to buy a refill instead of an entire Quik Draw Kit.
|
|
|
SAND AWAY Sand Away is a very strong cleaner and prep that can be used on leather and vinyl. It is designed to be used on those extremely soiled surfaces. Wipe on liberally and use with sand paper. Repeat as necessary. Sand Away will alleviate minor cracks and prepare the surface for repair compound and dye. When leather is badly cracked and thickly soiled, it will often be shiny and/or brittle. Sometimes the discoloration isn't obvious until it is thoroughly cleaned. This is a strong cleaner/prep so do not let it get on anything you do not intend on dying.
|
|
|
SURGICAL TUBING---16" LONG This tubing is especially useful. (As depicted by the picture) in working with the mouth atomizer for spraying liquids. The tubing is especially favorable to this use because it lightly expands and allows easy airflow. Many tubing are tight and restrictive and the end result is it can feel like blowing into a pinched tube. This can result is hyperventilating and lots and lots of looks from people as the technician turns purple before their very eyes. Just kidding. The proper tool makes it possible to get within inches of the substrate. Would you expect anything less from a doctor?
|
|
|
Teflon Mat The Teflon mat is a thin film that is placed over grain pattern as it rest on top of the applied vinyl repair compound. The Teflon mat is heated by moving the heat iron to and fro over the area until the heat is transferred to curation. 9" x 9"
|
|
|
Weller Iron with Shoe This tool has been around for a long time. The unit is electric that generates a good heat that is transferred to the iron. The Teflon mat is placed over the applied vinyl repair compound and moved back and forth until cured. The heat from the iron is transferred to the Teflon mat and creates the grain pattern for the heat graining process.
|
|
|
